You also in for don't know how much open water ink?Kunshan nicky oulette printing machinery industry co., LTD., after months of engineering research and development, finally introduced puzzled people for a long time, proportion of ink debugging ink special ink printing industry concentration detector using big problem.Let the printing ink has a standard quantitative.

A, before starting

1. Power supply: 2 Φ AC220V.

2. Remove all the materials on the machine.

3. The other.

Second, the use method

Put the ink cup under the test bar, adjust the height to the ball in the ink, the lever is a minutes after the start button, the digital display in DA0, write down the ink color.Press the corresponding key color, let DA0 several temporary meter in DA1 - DA6.According to the reset button reset DA0.Write down the DA1 - DA6 is then contrast ink concentration needed.

1. The boot screen

After the system is powered on, the initial screen man-machine interface: choose Chinese, English "button, enter the operating menu.

2. Enter the picture

Three, safety operation procedures

1. The operator must know the machine structure, performance, familiar with the rules of maintenance, familiar with the operation and the distribution, can operate alone.

2. Must be before starting the machine is used to conduct a comprehensive inspection, remove obstacles, prepared to start work.

3. Check whether all the mechanical parts before starting the loose.

4. Check the transmission parts before starting the lubrication condition, it is strictly prohibited in the absence of lubricating oil;Rack and fasteners, whether there is a deformation, loose phenomenon, confirmed rear can boot.

5. Run equipment working process of the operator shall not leave post, halfway down to shut off the power switch.

6. Equipment runtime it is forbidden to touch the operation, the site is strictly prohibited to clean when the equipment is running

And cleaning materials.

7. In an emergency quickly press the stop switch on the control panel.

8. When equipment failure should immediately stop processing, it is strictly prohibited to equipment to run in spite of illness.